Basic Info.
Certification
UL, CB, CQC
Humidifier Type
Rotor Dehumidifier
Product Description
1. Low dewpoint Dehumidification system specification
The technical proposals above use ZCB dehumidifying unit, air oulet rate is 7000 m³ /h,
It is made up of Pre-fliter segment, pre-cooling segment, rotor dehumidify segment, after cooling segment, process fan segment, regeneration system and controlling sysrem.
First, judge whether starting-up of the burningon sector's electrical heating is needed according to the temp. Of the processing air oulet passed through the dehumidifying rotor. If needed, deside the starting-up of the electrical heating'magnitude by the feedback temp. Signal from the in-doors. If not, maintain the stabilization of the drying room's temp. By the way of muti-range uninstalling cooling units with referece to the feedback temp. Signal from the room.
The Sweden PROFLUTE ceramics silica gel rotor whose carrier is ceramics fibre and the moisture absorption medium is special silica gel, is used in this system's pivotal drying component. It is a honeycomb inlay fixed model formated by special molding technique, with a long service life(7or8years) and good performance of deep moisture absorption.
This rotor in the system puts up cold blowing area. It has three functions. First, part of processing air after passing the cold blowing area cools the high temperature area reactived just now accompanied with lots of heat accumulation, in order that the air readied for processing can give a full play of drying effect after passing the cooling area. Second, after cold blowing, the dewpoint temp. Of the air is quite high. It would affect the units's dewpoint temp. Considerably if the air mixes with the dry air. Third, generly speaking, the air tempreture can reach at least 70 º Cthrough the cold blowing area. It can be used in reactive heating, saving more than doubled energy consumption for reactivity.
This strcture conquers the shortage of the way that some domestic manufactures get air for reactivity directely from the dry air which not only dissipation of energy but also affects the air oulet dewpoint.
The electrical equipment controlling inside the units adopts ECS controlling system as its core, forming fairly holonomic automatic controlling system. Each performance parameter can be queried and set on the control panel. Controller uses built-in muti-circuit simulation output. It can ensure the stabilization of the drying room's temp. By the way of adjusting units valve location according to the feedback temp. Signal from the in-doors. The units considers all kinds of situation such as starting up and shut down, protection, abnomaly alarm. It is simplicity of operation, safe and reliable.
TD200SIMATIC S7-200. TD200, CPU 22XPPI.
Units reaches design index after around 30 min. Starting-up and running. It is cabable for whole year's continuous running and adjusting running working condition automatically.
(6) Doe is installed transition sector for convinient overhaul. Filter equipment adopts America AFF standard specification, F6 level, which is convinient for users to update.
Item configuration
Pre-fliter Plate type non-woven fabrics(USA AAF) G4
Rotor Sweden PROFLUTE silica gel
Pre\after cooler Efficient pipe aluminum, making by OAK, USA
Driving rotor GPG Taiwan
Process and regeneration fan Shanghai General fan plant
Regeneration heating Efficient steel aluminum
Temp. And humidity transducer HONEYWELL
Appliance Siemens
Controlling system Unit uses ECS control system, Siemens
Rotor Sealing componet High temperature resistant silicon fluorine rubber
Units frame Aluminum alloy
Units model Two stories coloured steel sheet, middle polyurethane high voltage frothing
Address:
No. 28, 1#303,Xiangyuan Road, Gongshu Technological and Industry Area, Hangzhou, Zhejiang, China
Business Type:
Manufacturer/Factory, Trading Company
Business Range:
Consumer Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Service
Management System Certification:
ISO 9000, ISO 9001
Company Introduction:
The Company was set up in the Center of Hangzhou High-Tech Innovation, with the most outstanding and professional team of courage to break new ground, including five senior engineer, 3 Masters. The ratio of the College education staff is over 60%. Most of the staffs from the company are with the rich theoretical knowledge and more than 10 years R & D, manufacturing and practical experience of dehumidification equipment. With more than 30 years dehumidification industry experience, MBA Management team, and supported by the strong development team of Zhejiang University, the company try all the best to build the leading dehumidifiers ectract products, and also become the identical choice of high-end users of China, such as, Taiyuan Satellite base, Xichang satellite base, Beijing Satellite Control Centre, Qinshan Nuclear Power Plant, military-land, sea and air and other all branches.